Spray Foam

Insulation Products

You’re Cool When You’re Green®

 

7 REASON TO CHANGE TO QUADRANT

1.     Our product QuadFoam^® 500 achieves an average of 10 to 25% gain in yield over the highest yields that competitive products have been able to offer your organization. This of course is at sea level. Higher elevations would be adjusted accordingly as yields would have a percentage increase at higher elevations. Another words if your current highest yields product currently offered are presenting an average of 15,000 board feet and Quadrants products offer an average of just 15% increase, the simplicity of mathematics and financial gain speaks for itself. This is not a claim that we are proposing but a reality of what we are achieving throughout the country by not just a few but all of our applicator partners.

2.     Our product QuadFoam^® 500 is the perfect fit in today's retro / existing market as it has low odor not only at application time but at completion and beyond. This is a proprietary and technical achievement that the Quadrants companies through a collaborative effort between Quadrants multi-location of chemists have achieved without injecting any masking or (perfume enhancement). This achievement will prevent any warranty call back or on-site visitation for additional equipment ventilating. Additionally, this happy homeowner would most likely recommend to its neighbors and acquaintances their contentment with the job performed by your organization. Your spray technicians will also be considerably happier themselves if not having to be burdened with these odors that are not only irritating but in some cases may cause health issues, i.e. Eye and nasal irritations that may cause partial or full sick days.

3.     As we all know good spray technicians are hard to come by and due to the intense labor and heat that these technicians must bear, they will be overjoyed at the fact that the QuadFoam^®500 spray foam has been developed to have complete and full atomization at the spray gun tips. This advantage which additionally is a proprietary achievement that the Quadrant companies have developed will reduce an average of 80 to 90% of mist overs pray.

      More times than not in new construction or the retro market, the contractor has already installed Windows and doors prior to foam applications. The number two complaint that contractors have is overs pray. I am sure that you cover all windows and doors prior to application and I believe this policy is adhered to completely. However, as dust particles find their way throughout homes rather in new construction or in a retro project, polyurethane misting has the same size characteristics as dust and does find its way to areas that would be embarrassing to say the least but more importantly costly in the cleanup or window and door replacements that would be the obligation of your organization. Additionally, cleanup on concrete floors in new construction would be significantly reduced which of course would reduce labor hours in the after application cleanup. This full atomization technology will also keep your technician’s visors cleaner thereby allowing a better vision to spray those hidden nooks and crannies that are crucial in making a commercial project or home totally energy-efficient. This again will provide the building owner or homeowner a better application which equates to a more energy-efficient home thereby allowing another opportunity for recommendations by the same.

4.     Zero or no gun tip clogging is another Quadrant proprietary achievement which will reduce your labor hours by your spray technicians not having to take the three or four 10 minute breaks to climb off the rafters, go down to the spray rig and drill out the clogged spray gun tips. This is a multifaceted advantage both in the reduction of wasted time consumption and those 10 minute gun cleaning that may turn into 30 min. smoke, coffee and donut breaks. Imagine with the many project applications that you do on an annual basis the labor expenditure reduction that would be achieved by eliminating these excess and potentially time-consuming but yet simple maintenance requirement.

      The most important advantage I believe however is accident reduction as every time your spray technicians climbs up or down into the rafters of buildings or homes, there is a risk of injury due to falling. As our company strives for a zero injury through our safety standards as an ISO 9001 certified company, I am sure that your organization strives to achieve the same.

5.     Quadrant Chemical Corporation manufactures many products, coatings and raw materials for not only many Fortune 500 companies within the US and a number of global 1000 companies worldwide as well. One of our very well-known and well respected technical achievements is in the area of adhesion within some of our raw materials and coatings. We supply a good number of these Fortune 500 and global 1000 companies with our adhesive coatings and raw materials. We have passed this proprietary technology right along to our polyurethane spray foam insulation product lines.

      It is this advanced technology in adhesion that has gained us in very short order, a reputation within our spray foam products and the spray foam industry that allows us to say we have basically removed the very common irritations and the number one complaint that contractors and developers have and that is; “Voids and Shrinkage”. The user-friendliness of the Quadrant spray foams have allowed much more variables in not only temperature settings but the pressures necessary through the proportioning equipment needed to perform a proper and efficient application.

6.     Quadrant Urethane Technologies, a wholly-owned subsidiary of Quadrant Chemical Corporation has the current capacity to manufacture greater than 65,000,000 pounds of QuadFoam^® 500 and greater than 50,000,000 pounds of QuadFoam^® 2.0. This can currently be achieved on a yearly basis and on a single shift without the addition of any manufacturing equipment or personnel. You may always be rest assured that your orders would be fulfilled on a timely basis without any backorder unless a worldwide catastrophe, i.e. world war, hurricanes that may hit all of our manufacturing facilities at once in the North Texas areas or a shutdown of the entire United States economy. Having multiple manufacturing facilities allows us to have a redundancy in production in the unlikely event of a catastrophe that would hit one of our facilities.

7.     Finally, and extremely important in the reduction of warranty call backs that you might currently be having is our QuadFoam^® 500 and QuadFoam^® 2.0 technical and proprietary achievement to have these applications present their project with our product as the smoothest polyurethane spray foam application in the marketplace today. What importance does this have? The number three complaint that the majority of the applicators, developers, architects and especially homeowners have with little understanding of encapsulated attic or wall assemblies is low spots. These deep valleys or low spots that are common with most competitive products and that may indeed be sprayed to specifications of that project but surrounded by higher or wasted over sprayed areas are very noticeable to the building contractor or homeowner. The smoothness of the Quadrant products eliminates these call backs that require your organization to re-spray the low spots but more importantly the application presents itself as a more cosmetically appeasing application with reduced wastage in both labor hours an additional materials needed to fill in these low spots per the contractor or homeowners demand. By these cosmetically appealing jobs you will give the contractor/homeowner the assurance that the job is completed correctly and that the ultimate goal of energy-efficient application has be achieved. Another opportunity gained for recommendation of your company’s performance.

These seven areas of proprietary and technically advanced value added achievements that the Quadrant companies have been able to chemically develop and unseen in all the above areas by any other polyurethane spray foam system house, I know you will find a considerable overall pricing advantage/reduction.

FDA, EPA, and ATF Registered Facilities

ISO 9001:2008 Certified

Who is Quadrant Urethane Technologies?

Quadrant Urethane Technologies is a business unit of Quadrant Chemical Corporation, a 40+ year old leader in Manufacturing & Packaging with two ISO 9001:2008 registered factories in the North Texas area. Quadrant caters to six major markets: Aerospace, Automotive, Commercial, Industrial, OTC/Personal Care and now the Spray Foam Insulation & Structural Foam market. Quadrant utilizes Chempax MRP, with SAP interface and we have 20+ years of VOMI experience.

Products offered by Quadrant Urethane Technologies® include bio, renewable and repurposed materials. Quadrant BioSeal and NatureSeal spray polyurethane foam insulation systems are available from a nationwide network of certified dealers.

Polyurethane spray foam has been around for more than 40 years. Our focus is to develop a family of insulation products that perform great and have additional sustainable attributes, such as incorporating renewable ingredients or ingredients that have less of an impact on the environment.

What is the ISO 9001 Quality Standard:

 ISO (International Organization for Standardization) is the world's largest developer and publisher of International Standards.

ISO is a network of the national standards institutes of 160 countries, one member per country, with a Central Secretariat in Geneva, Switzerland, that coordinates the system.

ISO is a non-governmental organization that forms a bridge between the public and private sectors. On the one hand, many of its member institutes are part of the governmental structure of their countries, or are mandated by their government. On the other hand, other members have their roots uniquely in the private sector, having been set up by national partnerships of industry associations.

Therefore, ISO enables a consensus to be reached on solutions that meet both the requirements of business and the broader needs of society.

Why standards matter:

Standards make an enormous and positive contribution to most aspects of our lives.

Standards ensure desirable characteristics of products and services such as quality, environmental friendliness, safety, reliability, efficiency and interchangeability - and at an economical cost.

When products and services meet our expectations, we tend to take this for granted and be unaware of the role of standards. However, when standards are absent, we soon notice. We soon care when products turn out to be of poor quality, do not fit, are incompatible with equipment that we already have, are unreliable or dangerous.

When products, systems, machinery and devices work well and safely, it is often because they meet standards. And the organization responsible for many thousands of the standards which benefit the world is ISO.

When standards are absent, we soon notice!

What standards do; 

ISO standards:

Make the development, manufacturing and supply of products and services more efficient, safer and cleaner

Facilitate trade between countries and make it fairer

Provide governments with a technical base for health, safety and environmental legislation, and conformity assessment

Share technological advances and good management practice

Disseminate innovation

Safeguard consumers and users in general, of products and services

Make life simpler by providing solutions to common problems

Who standards benefit;

ISO standards provide technological, economic and societal benefits.

1.   For businesses, the widespread adoption of International Standards means that suppliers can develop and offer products and services meeting specifications that have wide international acceptance in their sectors. Therefore, businesses using International Standards can compete on many more markets around the world.

2.   For innovators of new technologies, International Standards on aspects like terminology, compatibility and safety speed up the dissemination of innovations and their development into manufacturable and marketable products.

3.   For customers, the worldwide compatibility of technology which is achieved when products and services are based on International Standards gives them abroad choiceoffers. They also benefit from the effectsof competition among suppliers.

4.   For governments, International Standards provide the technological and scientific bases underpinning health, safety and environmental legislation.

5.   For trade officials, International Standards create "a level playing field" for all competitors on those markets. The existence of divergent national or regional standards can create technical barriers to trade. International Standards are the technical means by which political trade agreements can be put into practice.

6.   For developing countries, International Standards that represent an international consensus on the state of the art are an important source of technological know-how. By defining the characteristics that products and services will be expected to meet on export markets, International Standards give developing countries a basis for making the right decisions when investing their scarce resources and thus avoid squandering them.

7.   For consumers, conformity of products and services to International Standards provides assurance about their quality, safety and reliability.

8.   For everyone, International Standards contribute to the quality of life in general by ensuring that the transport, machinery and tools we use are safe.

9.   For the planet we inhabit, International Standards on air, water and soil quality, on emissions of gases and radiation and environmental aspects of products can contribute to efforts to preserve the environment.

FDA, EPA, and ATF Registered Facilities

ISO 9001:2008 Certified